Podcast: Descargar (15.7MB)
Link Aggregation Control Protocol (LACP) es parte del estándar IEEE802.3ad y permite agregar varios puertos físicos a uno lógico. Además LACP permite negociar entre los dos extremos de la conexión.
Configuración en Cisco:
interface Port-channel10 description Portchannel con lacp switchport trunk encapsulation dot1q switchport trunk allowed vlan 100,200 switchport mode trunk spanning-tree portfast trunk ! interface GigabitEthernet0/2 description PCconLACP1 switchport trunk encapsulation dot1q switchport mode trunk channel-group 10 mode active ! interface GigabitEthernet0/3 description PCconLACP2 switchport trunk encapsulation dot1q switchport mode trunk channel-group 10 mode active !
Configuración en Mikrotik
[admin@Router1] interface bonding> add slaves=ether1,ether2
Configuración en Debian
auto bond0 iface bond0 inet static address 10.0.0.80 gateway 10.0.0.1 broadcast 10.0.0.255 netmask 255.255.255.0 up /sbin/ifenslave bond0 eth1 eth2 down /sbin/ifenslave -d bond0 eth0 eth1
Enlaces recomendados: